Wera Tools WERA-KOLOSS-SET 8002 C Koloss All Inclusive Set with 1/2in Drive + 8781 C Koloss Centering Pin

The ratchet that can also be safely and officially used as a hammer. The KOLOSS is a reversible, heavy-duty ratchet that can be used with a load of at least 600 Newton meters. The dual ratchet teeth and the minimum return angle of only 6° ensure rapid and precise screw driving even in confined situations. And the best thing: absolutely no impact on the hammer faces, however hard, can destroy the ratchet mechanism. Multi-component KraftForm handle optimized to withstand pressure, impact and tensile loads; take-up for KOLOSS extension 8780 C and KOLOSS centering pin 8781 C at end of handle. Also included in the set: 1 pad to protect materials and surface areas, 1 Koloss extension for the transfer of even more torque, 1 unlocking pin and 1 holster – so the Koloss can always be at hand.

Includes

• 8002 C 05003545001 1 x 1/2in x 341 mm
• 8780 C Koloss extension 1 x 341 x 137 mm
• 8000 HLF 05671319001 1 x 175 x 75 mm
• 8782 C Koloss pad set 1 x # 2 x 50 mm
• Unlocking pin 1 x 40,5 mm
• 8781 C Koloss centering pin 1 x 50 mm x 135 mm 

Features

• The heavy-duty ratchet that can also be safely used as a hammer.
• Typical fields of application are mechanical engineering, boatbuilding, mining, aircraft construction, bridge building, commercial vehicle construction and maintenance, railway and road construction and maintenance, industrial plant and equipment construction, high-bay warehouse construction, petroleum industry and many more.
• Non-removable sealed and hardened square drive for tough jobs.
• Changing the ratchet direction using a hardened push-through square drive ensures great resilience, since there is no susceptible switching mechanism that could be damaged by hammer blows. This is far more robust than a forward/reverse switch.
• Tubular shaft minimizes impact vibrations
• Dry-fined hammer face
• Used with rubber pad attachments to protect materials and surfaces.
• The drop-forged hammer head is permanently pinned to the shaft in a form-fit joint. This guarantees an almost non-detachable positioning of the hammer head on the handle.
• Dual ratchet teeth
• Gives the robust 30 saw teeth the precision engineering effect of 60 fine teeth with a 6° return angle.

8781 C Koloss centering pin

• KOLOSS centering pin can be used with Wera KOLOSS 8002 C
• To align lugs or drill holes.
• Conical pin
• Out of tough, hardened chrome-molybdenum steel

Centering pin for the Wera Koloss. To align lugs or drill holes. Conical pin, tough, hardened chrome-molybdenum steel.