Titebond Solvent-Based Heavy Duty Construction Adhesive is a premium-grade formula designed for more demanding construction and repair projects. It provides strong grab, fills gaps and irregularities and will remain permanently flexible. This professional strength formula will bond to most common building materials. It is covered under the 50 Year Gold Subfloor Warranty against subfloor squeaks and pops. When compared to competitive heavy duty adhesives, Titebond Solvent Based Heavy Duty is the best choice for all around use.
Features
- Best choice for all around use
- Class 1/8in type p/o subfloor adhesive in accordance with ASTM D3498-19
- Recommended for: demanding interior/exterior construction, installation, and repair projects.
- Compatible materials: common building materials including wood, metal, brick, marble, ceramic tile, concrete, drywall, plywood, OSB, particleboard and wet, frozen and treated lumber.
- Bonds heaviest materials
- Solvent-based
- Extremely versatile
- Bonds most common building materials
- Superior strength
- Waterproof
- All weather
- Exceptional durability
Application Guidelines
- Application temperature: 0°f to 100°f
- Service temperature range: -20°f to 120°f
- Working time: approximately 10-20 minutes for a 1/4in bead
- Prep: surfaces must be clean and free of any material that may prevent adequate adhesion.
- Application: cut tip on slant for 1/4in to 3/8in bead. for subfloors, cut tip straight across. puncture inner seal and place in cartridge gun. apply adhesive to one of the surfaces in either a continuous or spot bead. adhere materials within 15 minutes. press surfaces firmly together with a slight twisting motion. certain large applications may require additional bracing until adhesive has dried. note: for subfloors, apply adhesive to joists for one sheet at a time. nail or screw each sheet as recommended by the American plywood association.
- Cleanup: tools and adhesive may be cleaned with acetone or mineral spirits. follow solvent vendor's precautions.
- Limitations: not designed for continuous submersion or for use on plastics, polystyrene, or polyethylene foams. do not adhere one non-porous material to another since this will slow or prevent drying.