The SuperMax25-50 Drum Sander is the largest open-ended drum sander on the market. Sand 25″ in a single pass, and up to 50” in a double pass. Expand the scope of projects you’re able to complete, while increasing speed and consistency in which you’re able to do them!
The 25-50 Drum Sander comes standard on the Closed Mobile Base Stand. The drum is pre-wrapped with 80 grit sandpaper. Additional accessories and sandpaper are available for purchase.
Features of the 25-50 Drum Sander include:
- 25″ sanding in a single pass, 50″ in a double pass!
- More room for easy access to abrasives- no special tool needed
- Closed stand has built-in wheels and storage
- New mobile base helps stand and machine to move with ease
- Simple alignment feature: Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy.
- Indexed alignment setting: Has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 25”, the index lever will properly adjust the conveyor for flawless wide sanding.
- Easy height adjustments: A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments.
- Drum will never go “out of alignment” The drum carriage is bolted to the base, preventing any movement or alignment issues.
Specifications:
- Sanding Capacity: Maximum Width (in): 50 (two passes) Minimum Length (in): 2-1/4 Maximum Thickness (in): 4 Minimum Thickness (in): 1/32
- Dimensions (in):27D x 46W x 53H (on stand)
- Drum:Drum: 5 x 25 extruded aluminum
- Drum Speed: Drum Speed: 1740 RPM
- Dust Hood: Dust Hood: 1- 4″ vacuum port, min. 600 CFM recommended
- Conveyor Motor: Conveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM
- Drive Motor (TEFC): Drive Motor (TEFC): 1-3/4 HP
- Power Requirements: Power Requirements 110 V 20 amp
SMX-60-5000:
Ensure your drum sander continues top level performance with SuperMax Pre-Cut Abrasive Wraps. Sized to fit standard 25 In. drum sanders from Performax and JET, these tapered abrasive wraps are pre-cut and ready to attach to your sander. This mixed grit pack contains (1) 36-grit wrap, (1) 80-grit wraps and (1) 120-grit wrap.
Features:
- Heavyweight abrasive
- Pre-cut, tapered and ready to wrap
- Aluminum Oxide for heavy-duty all-purpose sanding
- Open coat aluminum oxide abrasives for less clogging in wood
- Resin bonded for maximum grain retention
- X Weight cloth backing - less tearing than a paper or lightweight cloth paper backing that many are selling
- Bi-directional
- Appropriate backing and configuration for drum sanding
- Antistatic backing, to facilitate dust collection