This Quadriset enables excellent results in the following work
- Grooving or dadoing with single cutter
- width: 1/8in (3.2 mm), 5/32in (4 mm), 3/16in (4.8 mm), 1/4in (6.35 mm)
- Grooving with cutter combination
- Achieving continuous width from 5/7 to 18 mm in increments of 0.1 mm
- Tongue and groove alone wood lengths
- For purposes of aligning or cladding
- Tongue and groove frames
- For doors, windows, pictures etc.
Includes
- Four single 2 wing slotting cutters marked
- A - Width 1/8in (3.2 mm) (Tool No. 108R2-3)
- B - Width 5/32in (4 mm) (Tool No. 108R2-4)
- C - Width 3/16in (4.8 mm) (Tool No. 108R2-5)
- D - Width 1/4in (6.35 mm) (Tool No. 108R2-6)
- One ball bearing (Tool No. BB-22)
- O.D. 7/8in (22 mm) x I.D. 5/16in (8 mm) x 9/32in thick
- One arbor with nut (Tool No. 1900048)
- 1/2in shank x thread and nut 5/16in NF
- L1 = 1 3/8in
- OAL - 3in
- Spacers, washers and shims
- Spacers 6.0 mm, 3 pcs, (Tool No. 1920160)
- Washers 1.0 mm, 5 pcs, (Tool No. 1920110)
- Shims 0.5 mm, 4 pcs, (Tool No. 1920130)
- Shims 0.1 mm, 10 pcs, (Tool No. 1921000)
Specifications
- Number of Cutters 2
- Diameter (D) 1 7/8in
- Shank (d) 1/2in