These are the ultimate bits to craft sturdy miter joints thanks to anti-kickback design and tough tungsten carbide cutting edges. By adding a second smaller bit, you can mill anywhere from 9,5mm to 28,5mm in thickness. A quick and easy way to accurately create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects. You also have the advantage of using the same bit for parallel joinery projects. To mill sturdy parallel glue joints, follow step 1 shown in the illustration with the inside face of the workpiece laid flat on the table and centred to the bit. To make the second part, Laythe workpiece flat on the table and centered to the bit. Mill with the inside face-up.
Features:
- Tungsten Carbide Tipped
- Axial Angle
- Two Cutting Edges
- Right Hand Rotation
- Anti Kick Back
- Not For Hand Held Use For Router Table Only
Specification:
- Diameter: 2-3/4"
- Cutting Length: 1-1/4"
- Cutting Angle: 45°
- Maximum Stock Thickness: 19/32" ~ 1-1/8"
- Total Length: 2-3/4"
- Shank Diameter: 1/2"
- Number of Cutting Edges: 2
- Material: Tungsten Carbide Tipped
- Right Hand or Left-Hand Rotation: RH
Warning:
- Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. This product can expose you to chemicals including nickel, cobalt and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.