The Wrencher-XXL was designed based on professional insights and features a tarpaulin interior that repels water and a removable padded tray ideal for water specimen bottles, long hand tools or power tools. The injection molded polypropylene waterproof base is ideal for damp basements and muddy crawl spaces.
Specifications:
- Height (H) : 13” (33 cm)
- Width (W): 26" (66 cm)
- Depth: 10.5" (26.5 cm)
- Handle Height (HH): 17" (43cm)
- Weight (empty): 8lbs/3.5 kg
- Internal Volume: 1980in3/32.5L
- Max Payload: 60lbs/27kg
Maximized Tool Storage Capacity:
- Easily cleaned tarpaulin interior repels water
- Can function as both open-top horizontal tote or closable gate mouth style bag
- Leather carrying grips & extra-long padded shoulder strap
- Over 20 exterior pockets for small hand tools, writing instruments or driver bits
- V-SWAP removable tool pocket panel system
- Interior tool tray with carrying handles ideal for water risk assessment specimen bottles or removable padded bulk storage
- Waterproof Polypropylene plastic base for moisture and abrasion protection
Additional Information:
- Keep the Zippers Clean & Lubricated: Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a toothbrush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
- Protect the Zippers from Sharp Objects and/or Excessive Heat: Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
- Don’t Overstuff the Bag: Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed proceed with caution.
