Seneca Woodworking SW-RTS500 Domino Cutter Adapter From DF500 To DF700

The RTS-500 Cutter Adapter is a precision machined, hardened steel adapter that allows mounting any of the Festool Domino DF500 cutters to the Festool Domino XL DF700. This enables the DF700 to cut smaller mortises that previously could only be done with the DF500. Any of the standard Domino Cutter bits (4mm/5mm/6mm/8mm/10mm) will work with this adapter.

The RTS-500 Cutter Adapter is sized so that when attached to a DF500 cutter, the overall length is the same as a DF700 cutter. This ensures mortises cut with DF500 cutters on the DF700 are the same width as they would be if cut with the DF500. This also maintains the accuracy of the plunge depth gauge on the DF700 and doesn’t require any additional math to calculate depth.

In addition to the RTS-500 adapter, you may want to check out our Domi-Shims, which allow the Domino XL DF700 to center on ply much narrower than it was originally designed for.

Cutters, wrenches, and Domino XL shown in photos not included.