The Cabineo X is a cabinet connector that uses drilling or milling processes for cabinets and shelves with pure surface machining. No need for edge drill holes for a dowel. Thanks to this feature, machining is possible on all CNC machining centres, including simple 3-axis machines and nesting machines. A special feature of the Cabineo X is that the open housing can be combined with the various Cabineo screws and shelf supports. Depending on the application, a wood screw, a metric screw or a shelf support can be used. If a carcass corner or a fixed shelf is to be firmly connected, the wood screw is pre-assembled at the side. The lid or shelf is placed on the screwed-in wood screws and pre-fixed in this manner. A cordless drill and the Cabineo bit are used to tighten the screw and connect the workpiece quickly and powerfully. This enables the assembly of even large pieces of furniture by one single person. Alternatively, the open housing allows the desired screw to be inserted so that the Cabineo X cabinet connector can be used in the same way as the standard Cabineo. In combination with a Cabineo X shelf support, the connector prevents shelves from being unintentionally pulled out or lifted off, which is particularly helpful for open shelf units or caravan construction and shipbuilding. The milling for the Cabineo X is identical to the standard Cabineo, so the same machining is possible on all workpieces. Compared to a cam connector, the Cabineo impresses with its more efficient processing and faster assembly and is also distinguished by a high clamping force, all without the need for additional wooden dowels. The Cabineo offers considerable advantages in the manufacturing, transport and assembly process. This means that the connector can even be mounted in the workpieces during the production process and these can, in turn, be stacked for transport, without protruding parts that could damage the workpieces. Depending on the colour of the material used, the white or black housing colour may be better suited. If the Cabineo is to be concealed, cover caps are available in different colours.
Cabineo installation options:
- Collar on the surface so that the milled edge is covered and the connector protrudes slightly
- Collar recessed so that the connector is flush with the panel surface
- Collar and cover cap recessed so that the connector and cover cap are flush with the panel surface
Features:
- No edge drilling: For use with CNC without edge drilling
- Locked shelf: Secured against pulling out and lifting off; ideal for open shelf units or for caravans and shipbuilding
- Multifunctional housing: Same housing for connectors and adjustable shelves
- Simplified assembly: Placing the cabinet tops and shelves onto the screw or shelf pin simplifies the assembly
- Various materials: Counter thread can be cut directly into the material
Specifications:
- Minimum Workpiece Width: 21 mm
- Minimum Material Thickness for Edge Cuts: 12 mm
- Minimum Material Thickness for Surface Cuts: 9 mm
- Minimum Material Thickness for Centre Wall Machining: 16 mm
- Size (LxWxH): 8 mm
Applications:
- General furniture construction or carcass manufacturing for panel materials
- Detachable joints within different materials
- Built-in cupboards or wardrobes where the shelves must be secured
- Kitchen cupboards detachable for transport
- Shelves for kitchen cabinets or open shelf units that are pre-assembled before transportation
- Access panels or covers that can be removed and refitted without tools
- Furniture and displays in shopfitting and for shelves, based on a drilling or milling process whereby only the surface needs to be processed.