The Cabineo 8 is a one-piece cabinet connector that uses a drilling or milling process with pure surface machining. No need for edge drill holes for a dowel. Thanks to this feature, machining is possible on all CNC machining centres, including simple 3-axis machines and nesting machines. The one-piece Cabineo is press fitted into the drilling or the milling either in the workshop or on site after transportation. During assembly, the pre-installed, slightly protruding screw is positioned in the opposite drill hole. Using a cordless drill and the Cabineo bit, the screw is screwed into the 5 mm hole of the counterpart and the workpieces are quickly and powerfully connected. Designed to complement the Cabineo 12, the Cabineo 8 consists of the same housing, but is supplied with a shorter screw. If two shelves at the same height meet a dividing panel, the dividing panel with the Cabineo 12 must be at least 24 mm. If the Cabineo 8 is used, a material thickness of 16 mm is sufficient. Compared to a cam connector, the Cabineo impresses with its more efficient processing and faster assembly. It is also distinguished by its high clamping force and all without the additional use of wooden dowels. The Cabineo offers considerable advantages in the manufacturing, transport and assembly process. This means that the connector can even be securely mounted in the workpieces during the production process. The workpieces can be stacked as flat packs for transportation, without protruding parts that could damage the workpieces. This also eliminates the fabrication and the additional logistical outlay involved in a separate hardware bag. There are no loose parts of fittings that need to be installed during the final assembly. Depending on the color of the material used, the white or black housing color may be more suitable. If the Cabineo is to be hidden, cover caps are available in different colors
Features:
- Assemble and screw together directly with the cordless drill without having to insert screws or dowels first
- For use with CNC without edge drilling
- The short 8mm screw enables use in centre panel joints from 16mm material thickness or in corner connections from 10mm
- Due to the high strength, no dowels are required, which completely eliminates the need for edge drilling
- Installation in the workshop means no losing of the housing or screw, as well as faster assembly on site
- Carcase connectors for time savings throughout the entire production chain
- For material thicknesses from 12 mm and center panels from 16 mm
- For every CNC machine thanks to simple machining on the surface
- Elimination of dowel drilling and installation leads to time savings
- Ideal for time-saving, stable carcasses and cabinets
Specifications:
- Installation tolerance longitudinal: ± 0.1 mm
- Installation tolerance radial: ± 0 mm
- Minimum workpiece width: 21 mm
- Minimum material thickness for edge cuts: 12 mm
- Minimum material thickness for surface cuts: 9 mm
- Minimum material thickness for centre wall machining: 16 mm
- Tensile strength in particle board: 520 N
- Tensile strength in MDF: 610 N
- Tensile strength in beech: 1530 N
- Shear strength in particle board: 530 N
- Shear strength in MDF: 680 N
- Shear strength in beech: 1430 N
- Size (LxWxH): 33.8 x 10.8 x 16.5 mm
The Cabineo offers three installation options:
- Collar on the surface so that the milled edge is covered and the connector protrudes slightly
- Collar recessed so that the connector is flush with the panel surface
- Collar and cover cap recessed so that the connector and cover cap are flush with the panel surface
Applications:
- General furniture construction or carcass manufacturing for panel materials
- Built-in cupboards or wardrobes
- Kitchen cupboards detachable for transport
- Kitchen cabinets and open shelf units
- Furniture and displays in shopfitting