The SawStop 10in Professional Cabinet Saw provides superior performance to meet the demands of discerning craftsmen and woodworkers. With SawStop legendary safety system, ground breaking dust collection and flawless fit and finish it’s ready to help you get the job done.
Now the Professional Cabinet Saw is available in a 1.75HP motor configuration. Plug in anywhere with 110 volt convenience!
Includes
- (2) cast iron extension wings
- (1) miter gauge
- (1) micro blade guard (1.75hp models)
- (1) dust collection blade guard (3hp models)
- (1) riving knife
- (2) blade wrenches
- (1) push stick
- (1) 10in blade
- (1) table insert
- (1) standard brake cartridge
- (1) owner’s manual
- (2) hardware packs
- (1) 3mm hex key
- (1) 5mm hex key
- (1) 8mm hex key
- (1) blade spacing adjustment gauge
Specifications
- Motor: (all 60Hz, TEFC):1.75
- Cabinet footprint: 19 3/8in w x 19 3/8in d
- Cast iron table: 20in w x 27in d
- Cast iron table (with extension wings): 44in w x 27in d
- Extension wings: 12in w x 27in d each
- Extension table 36 in rails: 23 3/4in w x 27in d
- Weights - table saw only: 317 lb (1.75 hp)
- Weights - with 36 in fence systems: 408 lb (1.75 hp)
- Weights - (optional cast iron wings): N/A
- Shipping weight (approx.): 390 lb (table saw only)
- Blade: 40-tooth, 5/8in arbor
- Blade diameter: 10in
- Blade tilt: Left
- Blade kerf: 0.118in (3mm)
- Blade plate thickness: 0.078in (2mm)
- Max. depth of cut, blade at 0º: 3 1/8in
- Max. depth of cut, blade at 45º: 2 1/4in
- Max. rip, right of blade - 36 in: 36in (with 36in rails)
- Max. rip, left of blade: 12in
- Dado diameter: 8in (requires 8R2 brake, dado insert)
- Dado max. width: 13/16in
- Arbor diameter at blade: 5/8in
- Miter slots T-shaped: 3/4in at top, 1in at bottom, 3/8in deep
- Miter slots center: 11 1/8in center-to-center
- Miter slots info: 5 1/2in (arbor flange to center of right slot)
- Dust collection port diameter: 4in
- Riving knife / splitter thickness: 0.090in (2.3 mm)
- Blade guard (dust collection): polycarbonate, extends 1 3/16in right of blade (3HP)
- Blade guard (micro guard): polycarbonate, extends 1in right of blade (1.75HP)
- Insert: zero clearance, phenolic core, melamine surfaces
- Hand wheels: 7in diameter, cast iron w/ chrome handle
- Belts: 2 V-ribbed belts – arbor b. static dissipative
- Overall saw dimensions: 44in w x 29 3/4in d x 34in h
- Overall saw dimensions 36 in: 69 1/8in w x 33in d x 34in h
- Motor configuration 1:PCS175: 1.75 hp, 110v, 14 A
- Motor configuration 2: (user config. to 220v with optional kit)