Titebond Speed Set Wood Glue is an extremely fast-setting, high solids PVA adhesive. It provides exceptional gap filling properties developing a bond stronger than the wood itself. This product offers excellent sandability, unaffected by finishes, and increases productivity through its shorter clamp time with no increase in viscosity. Titebond Speed Set cleans up with water.
Features:
- Extremely fast set – 15 minute clamp time
- Visible under black light
- Heat resistant – Sands easily
- Excellent strength & durability
- Unaffected by finishes
- Easy water cleanup
Applications:
- Application Temperature: Above 59°F
- Open Assembly Time: 2-4 minutes (70°F / 50% RH / 8% MC)
- Total Assembly Time: 8-10 minutes (70°F / 50% RH / 8% MC)
- Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
- Required Clamping Pressure: Use only enough pressure to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
- Method of Application: Any method can be used for spreading as long as Open and Total Assembly Times are met (see above)
- Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess
- Limitations: Titebond Speed Set Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 59°F. Do not Freeze. Agitate adhesive monthly to reduce product settling. Adhesive is extremely fast setting. It is important to follow Assembly Time recommendations. Minimum clamp-time is 15 minutes. Longer clamp times may be beneficial. Read SDS before use. Keep From Freezing. Keep Out Of The Reach Of Children
Specifications:
- Size: 8 oz. Bottle
- Conforms to ASTM D-4236
- Type: Aliphatic resin emulsion
- Calculated VOC: < 6 g/L
- State: Liquid emulsion
- Weight Per Gallon: 9.3 lbs.
- Color: White
- Dried Film: Translucent
- Flashpoint: > 200°F
- Solids: 60%
- Freeze / Thaw Stability: Not stable
- Viscosity: 3,600 cps.
- pH: 4.7
- Chalk Temperature: To assure a good bond, 59°F is the lowest recommended temperature for the glue, air and materials during application and drying.
- Storage Life: 24 months in tightly closed containers at 75°F. For best results, mix glue every 30 days to reduce settling.