FlowCast SPR has been formulated with a simple 2:1 mix ratio and is designed for small castings, allowing users to create projects with thinner profiles, such as coasters and serving trays. It can be combined with liquid or metallic pigments to create custom colors and effects.
FlowCast SPR is intended for pours from 6-25 mm (¼-1") per layer, with a maximum volume of 3 L. FlowCast SPR can be worked using the same tools you have in your woodshop.
With Ecopoxy's ever-growing line of EcoPoxy pigments and accessories, we can support you with everything you need for your epoxy projects.
Product Feature:
- Perfect for Small Pours: ¼" to 1" Thick per Layer
- Faster Curing: Finish Your Projects in a Weekend
- Bubble-Free Castings: Excellent Air Release
- Outstanding Transparency: Cures Water Clear
Product Specification:
- Pour Depth: 6-25mm (0.25-1") for pours up to 3 L
- Mix Ratio by Volume (A:B): 2:1
- Mix Ratio by Mass (A:B): 2.5:1
- Working Time (in mold): 4 - 5 Hours
- Set To Touch: 24 hours
- Demolding Time: 24 Hours
- Time Finishing: 1 day for 25mm (1”) pour
- Full Cure: 3 Days
- Working Temperature: Resin, workpiece, and workspace temperatures should be 20-25°C (68-77°F)
- Storage Temperature: 15-25°C (59-77°F)
- Clean Up: Isopropyl/Denatured Alcohol or Warm Soapy Water
- Shelf Life: Two years in unopened container, 3 months once opened
Mixing & Application Instructions:
Shake Part B well before use. In a clean, dry container combine (by volume) 2 parts resin with 1 part hardener and mix thoroughly for 4-5 minutes. Add Liquid or Metallic pigments as desired and mix until evenly dispersed.
Application
Working area should be clean, dry, and free of dust. FlowCast SPR can be poured at 6-25 mm (¼-1”) per layer. FlowCast SPR will not shrink while curing under normal conditions. However, it may slowly fill cracks and voids in live edge wood pieces, causing the resin level to drop. Be prepared to add more epoxy as needed.
Epoxy releases heat when curing. For pours deeper than 25 mm (1") and/or at a volume greater than 3 L, multiple thinner pours may be necessary to prevent overheating. For best adhesion between layers, wait until the first layer is fully set to touch. Sand with 220 grit sandpaper and wipe down before pouring another layer.
Used to Create:
- Serving Trays
- Drink Coasters
- Decorative Art Pieces
- Other Small-Scale Live-Edge Casting Projects